Product Description:

Addlink S72 M.2 2280 PCle Gen3x4 NVMe Internal SSD - 2TB

S72 GEN3X4 NVMe

addlink S72 SSD is built with next-generation QLC 3D NAND to offer amazing value, great performance and aims at high-end applications, such as digital audio/video production, gaming, and enterprise  usage, which require constant processing heavy workloads with no system lags or slowdowns of any kind. It is an ideal upgrade for users looking to make the switch from 2.5”SSD to PCIe, whether as storage or a boot drive.

Exceptional Performance with 3D QLC Flash 

addlink's S72 QLC technology delivers the features, capacity, performance and value to challenge HDDs in environments where performance is critical and the cost of SSDs has historically been too high. With QLC SSDs, you can quickly access and analyze the read-intensive, performance-sensitive workloads that fuel your business. The S72 SSD follows NVMe and utilizes the PCIe Gen3 x 4 interface, resulting in compelling performance of Read/Write up to 3400/3000MB/s.and random Read/Write 480K/680K IOPS. 

Top Three Benefits of QLC SSDs

Lower TCO

While performance focused, read-centric workloads rely on massive arrays of HDD to deliver the results that users demand, QLC storage does it with fewer drives — lowering your performance-focused total cost of ownership. 

More Capacity

QLC stores more bits per cell than its predecessors, enabling immense gains at the system, rack and data center levels that are more cost-effective.

Smaller Footprint

QLC technology's ability to increase per-server density reduces rack space by up to 7.7X compared to 2TB HDDs, saving precious and expensive data center real estate.

Huge capacity and aim at high-end applications 

Experience the unprecedented performance for heavy workloads and engineering applications with the highly reliable S72 SSD, available in high capacity up to 4TB. The S72 boasts a cutting-edge 3D NAND-based architecture that delivers the next-generation performance in a compact M.2 form factor.

Great Compatibility

S72 builds in M.2 2280 form factor and is the ideal for thin, light notebooks & in systems with limited space. Multi-purpose SFF connector replaces small mSATA & mini-PCIe slots.

Includes SSD ToolBox Software

addlink M.2 PCIe SSD Toolbox is a software offer an easy way to analyze and manage your drive. With addlink M.2 SSD Toolbox you will be able to:

View drive information exp: general SPEC, firmware version
Scan and diagnostic drive Health
Check drive identify device command
Monitor SMART Status
Run secure erase

Specifications

Capacity : 2TB

NAND Flash : 3D QLC

Dimensions : 80(L)x22(W)x3.5(Max.H) mm, 8.2g

Interface : NVMe GEN3x4 1.3

Form Factor : M.2 2280

Seq. Read/Write (MB/s) : 3400/3000

4K Random Read/Write (IOPS) : 255K/670K

Operating Temp. : 0°C ~ 70°C

Storage Temp. : -40°C ~ 85°C

MTBF : 1.8 Million Hours

TBW : 530TBW

Support Functions : Wear Leveling, Bad Block management, TRIMM, S.M.A.R.T, Over-Provision, End to end Path Protection Thermal Throttling, SMART ECC/ReFresh, Drive Log Support TCGOPAL/Pyrite

Operating System : Microsoft Windows 7 (additional driver required) Microsoft Windows 8 (additional driver required) Microsoft Windows 10, Linux Kernel 2.6.31 or later

Note : Please make sure that your computer has a M.2 slot.